Автор Тема: Ncam (based on oscam)  (Прочитано 10471 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн Root

  • Супермодератор
  • Аксакал
  • *****
  • Спасибо
  • -> Вы поблагодарили: 4091
  • -> Вас поблагодарили: 11147
  • Сообщений: 2507
  • Респект: +1817/-0
Ncam (based on oscam)
« Ответ #30 : 31 Январь 2019, 15:44:22 »
NCam 8.3-r0 Emu -r786
-[powervu] Added support for hash mode 28
-[streamserver] Better audio pid detection, similar to dvbapi
(For some stream types, parse the program element descriptors to determine whether the pid is audio or not. This way much lower cpu power will be used (no unnecessary descrambling of other stream types). This is also needed for Rosscrypt1 because the key finding algorithm depends on accurate detection of video and audio pids)

Оффлайн bingo

  • Друзья
  • Пользователь
  • ***
  • Спасибо
  • -> Вы поблагодарили: 405
  • -> Вас поблагодарили: 301
  • Сообщений: 72
  • Респект: +45/-0
Ncam (based on oscam)
« Ответ #31 : 05 Февраль 2019, 14:47:06 »
NCam 8.4-r0 Emu -r786
-extended fix for orf global emm
-dont disable global emms or set in config blockemm-g = 0
-caid 0x0D96 & 0x0D98

Оффлайн bingo

  • Друзья
  • Пользователь
  • ***
  • Спасибо
  • -> Вы поблагодарили: 405
  • -> Вас поблагодарили: 301
  • Сообщений: 72
  • Респект: +45/-0
Ncam (based on oscam)
« Ответ #32 : 16 Февраль 2019, 19:18:26 »
Ncam v 8.8
Ncam compiled and patched by marouan & RAED
-Improvements emu
-clean implementation of the card list
-(rarely used modules are set from default on to default off (no codechange just setup switch))
-fix reset to wrong defaults
-[nemu] Changed function declaration to a more clean way
-[streamserver] Improved Compel algorithm
(Picture is more stable now with minimum glitches only at key change (every ~53 seconds). The teletext pid is also descrambled now)

Ncam.config​ Files​ 16.02.2019

продолжение...
« Последнее редактирование: 16 Февраль 2019, 19:21:19 от bingo »

Оффлайн bingo

  • Друзья
  • Пользователь
  • ***
  • Спасибо
  • -> Вы поблагодарили: 405
  • -> Вас поблагодарили: 301
  • Сообщений: 72
  • Респект: +45/-0
Ncam (based on oscam)
« Ответ #33 : 16 Февраль 2019, 19:19:18 »
продолжение...

Оффлайн bingo

  • Друзья
  • Пользователь
  • ***
  • Спасибо
  • -> Вы поблагодарили: 405
  • -> Вас поблагодарили: 301
  • Сообщений: 72
  • Респект: +45/-0
Ncam (based on oscam)
« Ответ #34 : 28 Февраль 2019, 15:32:30 »
NCam 9.1

Improvement the emu
-[nemu] Fixed potential deadlock in powervu emm handling
(When the key DB contains no powervu keys, the powervu_get_hexserials() retuns 0 and the mutex in emu_get_pvu_emm_filter() is not released)

Оффлайн Руслан

  • Бывалый
  • ***
  • Спасибо
  • -> Вы поблагодарили: 445
  • -> Вас поблагодарили: 1046
  • Сообщений: 301
  • Респект: +112/-0
  • http://u4elsat-new.ru
Ncam (based on oscam)
« Ответ #35 : 22 Март 2019, 07:22:46 »
9.4 Ncam.sh4
9.4 Ncam.mips

Оффлайн Дигидон

  • Супермодератор
  • Аксакал
  • *****
  • Спасибо
  • -> Вы поблагодарили: 5762
  • -> Вас поблагодарили: 18402
  • Сообщений: 4159
  • Респект: +3432/-0
Ncam (based on oscam)
« Ответ #36 : 06 Апрель 2019, 15:33:59 »
NCam 9.6-sh4 Emu -for sh4 spark

-[powervu] Added support for modeCW 4 and modeUnmask 4


Скрытый текстСкрытый текст (вы должны войти под своим логином или зарегистрироваться ).
У вас нет прав чтобы видеть скрытый текст, содержащейся здесь.
« Последнее редактирование: 06 Апрель 2019, 15:53:46 от Марат »

Оффлайн Admin

  • Администратор
  • Аксакал
  • *******
  • Спасибо
  • -> Вы поблагодарили: 14412
  • -> Вас поблагодарили: 21273
  • Сообщений: 6567
  • Респект: +4391/-0
Ncam (based on oscam)
« Ответ #37 : 02 Май 2019, 09:30:36 »
Версия 9.9 for sh4 spark
(02-05-2019-[nemu] Pass complete rdr structure to emu_process_ecm()(Also re-ordered arguments in powervu_ecm())-remove duplicate debug dump of er->ecm-fix bug in disablecrccws_only_for also in cacheex-general disable checksum correction code optimization-[powervu] Added new method for matching ECM and EMM keys(Read the wiki for instructions on how to use it: PowerVU config · oscam-emu/oscam-patched Wiki · GitHub method is based on enigma2 namespace and it is only available for enigma2 and Tvheadend/VDR software for PC. Also, it does not work with stream relay)-[dvbapi] Fix for stapi, coolapi, etс)

Оффлайн Дигидон

  • Супермодератор
  • Аксакал
  • *****
  • Спасибо
  • -> Вы поблагодарили: 5762
  • -> Вас поблагодарили: 18402
  • Сообщений: 4159
  • Респект: +3432/-0
Ncam (based on oscam)
« Ответ #38 : 05 Май 2019, 18:14:34 »
Ncam v10

build-sh4 (Golden Media-Galaxy innovations-Amiko)
Ncam New Fix compiled and patched by marouan & RAED

+ * config

Оффлайн Жирный

  • Эксперт
  • Аксакал
  • ****
  • Спасибо
  • -> Вы поблагодарили: 2838
  • -> Вас поблагодарили: 12592
  • Сообщений: 2862
  • Респект: +1453/-0
Ncam (based on oscam)
« Ответ #39 : 05 Июнь 2019, 18:37:53 »
Ncam   10.1  sh4  by marouan & READ

-[biss] Increased variable size to avoid potential overflow
-[viaccess] Fixed CW checksum bytes for viaccess 2
-Added support for a higher number of demux devices in CA PMT
(Modern enigma2 boxes with FCB tuners can have many demux devices,
so a new CA PMT descriptor that allows up to 128 demuxes (descriptor tag 0x86) is now supported.
Also, the get_demux_options() function is completely re-written,
so it doesn't care for the order of descriptors inside the CA PMT message)

Оффлайн Mika

  • IPTV команда
  • Аксакал
  • ****
  • Спасибо
  • -> Вы поблагодарили: 5249
  • -> Вас поблагодарили: 16643
  • Сообщений: 3783
  • Респект: +2298/-0
Ncam (based on oscam)
« Ответ #40 : 16 Июль 2019, 22:50:05 »
Ncam  10.3  marouan & READ

-fix MODULE CONSTCW
-fix webif save issue with high var count
-Bug fixes and improvements to BISS2 mode CA
-Changed variable name (cosmetic)
-Changes to a couple of log messages
-When parsing PAT, save found PMT pid in the demuxer
-Moved reading of priority entries in separate functions
-Moved parsing of CA descriptor to a separate function
-Moved #define's to header file and made a few cosmetic changes
-Fixed compilation with coolapi
-DVBAPI_CA_SET_DESCR_DATA struct was not sent correctly to network clients

Оффлайн Жирный

  • Эксперт
  • Аксакал
  • ****
  • Спасибо
  • -> Вы поблагодарили: 2838
  • -> Вас поблагодарили: 12592
  • Сообщений: 2862
  • Респект: +1453/-0
Ncam (based on oscam)
« Ответ #41 : 19 Август 2019, 12:55:44 »
Ncam 10.4 compiled and patched READ

[dvbapi] Rewritten the CA PMT parsing code
Some key notes for this revision:
* The CA PMT and PMT parsing code is split into separate functions. Additional functionality is also moved to different functions.
* The previous CA PMT parsing logic is retained (written by theparasol), but the code is much simpler, easier to maintain and a bit faster.
* The CA PMT message is not completely parsed now if there is no need for it (e.g. no change is made to the channel).
* The PMT is now parsed only if it's necessary (e.g. for powervu channels, when no streams are present in CA PMT, etc).
* Added preliminary support for reading the "ca_pmt_cmd_id" value.
A future update (in oscam and enigma2) will allow using multiple oscam instances simultaneously.
* Added support for a new descriptor with tag 0x87 in the CA PMT message, used exclusively for sending the ca device information.
* Added detailed information for the private CA PMT descriptors supported by oscam in the readme (for dvbapi client developers).
[dvbapi] Fixed previous commit when WITH_EXTENDED_CW is enabled
[dvbapi] Fixed 'ca_pmt_cmd_id' value for PMT files
For CA PMT messages received via PMT files, set the "ca_pmt_cmd_id" to a proper value (ok_descrambling) instead of zero.
Also made few cosmetic changes.
[dvbapi] Reworked 'ca_pmt_cmd_id' skipping logic
According to the spec (​https://www.dvb.org/resources/public/standards/En50221.V1.pdf), the "ca_pmt_cmd_id"
value shall be present inside the ES info loop. Unfortunately, each dvbapi client does each own thing. The
only reliable way to detect when this info is present in the CA PMT is to actually check its value, like it
was done in the old code.
Most boxes always send the typical value of 0x01 (ok_descrambling) and the above check works fine because
there is no descriptor_tag 0x01 to get confused with. On the contrary, for enigma2, values like 0x03 (query),
0x04 (not_selected) are possible (not yet, but soon). Skipping these higher values the same way will not work,
because descriptors with such tags can exist, so a different check is implemented for enigma2.
In practice, this commit fixes the VDR dvbapi plugin, as well as the enigma2 boxes with wrong dvbapi boxtype
setting ('none' instead on the correct 'dreambox' - the setting is irrelevant now, but will make a difference
in the future, so make sure you set it correctly).
[dvbapi] Added option to enable/disable ecm.info file creation
[nemu] Switched to oscam's function for getting the section length
[biss] Clean up and bug fixes in Mode 1

Оффлайн Руслан

  • Бывалый
  • ***
  • Спасибо
  • -> Вы поблагодарили: 445
  • -> Вас поблагодарили: 1046
  • Сообщений: 301
  • Респект: +112/-0
  • http://u4elsat-new.ru
Ncam (based on oscam)
« Ответ #42 : 19 Сентябрь 2019, 18:27:44 »
Ncam 10.5 compiled and patched READ

Спойлер   :
-[powervu] Added cw hash mode 34
-[dvbapi] SDT parsing optimizations
* The SDT filter is now stopped even if no service name or provide name is found. Previously, on FTA or BISS channels, the SDT filter would run forever.
* The SDT is now used for getting the tsid and onid of the service (in case we haven't already receive them in the CA PMT).
* Duplicate info from the log is removed to keep it clean. The SDT information is only printed once.
* Removed some redundant chekcs from the SDT parsing function. They are already done in the caller function.
* Added more service types as "tv".
* The actual string parsing and supported character sets remained the same (still some eastern character sets are not supported).
-[dvbapi] Display service name when zapping
* If present in ncam.srvid or ncam.srvid2, the service name is displayed at channel zap (like it was done before the CA PMT rewrite).
-[dvbapi] CAT filtering optimizations
* Separate CAT filter (starting and stopping) from EMM filtering.
* Stop CAT filter as soon as CAT is parsed, instead of letting it run forever. (Everytime we get a new channel, the CAT filter is restarted anyway).
* Split CAT parsing from CA descriptor parsing.
-[dvbapi] Cosmetics and minor optimizations
-[dvbapi] Added more PMT audio descriptors



« Последнее редактирование: 19 Сентябрь 2019, 18:56:20 от Руслан »

Оффлайн Руслан

  • Бывалый
  • ***
  • Спасибо
  • -> Вы поблагодарили: 445
  • -> Вас поблагодарили: 1046
  • Сообщений: 301
  • Респект: +112/-0
  • http://u4elsat-new.ru
Ncam (based on oscam)
« Ответ #43 : 19 Сентябрь 2019, 19:00:22 »
Ncam 10.5 compiled and patched READ

Дополнение « Ответ #42
« Последнее редактирование: 19 Сентябрь 2019, 19:04:34 от Руслан »